We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Bowers & Wilkins website. However, if you would like to, you can change your cookie settings at any time.

SA250 Mk2

The SA250 Mk2 subwoofer amplifier is specifically designed for use with the Custom Installation Series In-wall subwoofers.

SA250 Mk2

The SA250 Mk2 subwoofer amplifier is specifically designed for use with the Custom Installation Series In-wall subwoofers, the ISW-3 and ISW-4. Deceptively slim at 3.5inches, and weighing 11.9lb, it provides 250 Watts of power.

The SA250 Mk2's equalisation is custom tailored to the In-wall subwoofers, with a two position EQ switch to select between the ISW-3 and ISW-4.

SA250 Mk2
Model SA250 Mk2
Description 250W rack-mount amplifier with built-in subwoofer equalisation
Front panel: Rotary volume (line in)
Rotary low-pass filter frequency (4th-order Linkwitz, 40Hz - 140Hz)
Low-pass filter defeat 2-posn switch
Phase 0º/180º 2-position switch
Bass extension 3-position switch
Movie/music EQ 2-position switch
On/auto/s
Rear panel: Model select 2-position switch (ISW-3/ISW-4)
Amplifier inputs 2x RCA Phono socket, line in
2x RCA Phono socket, link out
1x XLR socket, line in
1x XLR socket, link out
3.5mm jack - 12V trigger on/standby (overrides manual standby setting)
3.5mm jack - 12V trigger equalisation movie/music
Amplifier outputs 1x Neutrik® Speakon® 4-pole speaker socket
2x pairs of Binding Posts
Amplifier power output 250W
Input impedance 33kΩ
Signal / noise >80dB
Rated power consumption 95W – 1/8 full power
30W – Idling
<1W - Standby
Height 100mm (3.9 in) [88.5mm (3.5 in) plus feet]
Width 430mm (16.9 in)
Depth 322mm (12.7 in)
Front panel height 2U 88.1mm (3.5 in)
Net weight 5.4kg (11.9 lb)
Finish Black

Related products

ISW-3

ISW-3

The ISW-3 is an incredibly versatile and compact in-wall and in-ceiling subwoofer.

ISW-4

ISW-4

The ISW-4 in-wall subwoofer ifeatures two long-throw 200mm (8in) drivers, which allow it to move the large volumes of air needed for high-quality low-frequency output.

CWM7.3

CWM7.3

Our top range in-wall speaker, the CWM7.3 is a mighty three-way unit bringing together tried and tested audiophile technologies with new innovations specially developed for custom installation

CCM7.3

CCM7.3

The CCM7.3 is a three-way speaker featuring true audiophile technologies such as a Nautilus tube-loaded 25mm(1in) soft dome tweeter, a 100mm (4in) FST™ Kevlar® mid-range and two 130mm (5in) paper/Kevlar bass drivers.

Copyright © 2014 Bowers & Wilkins. All rights reserved.